2002 Chevrolet Blazer "sportage compression engine" Questions

...sportage cant here fuel pump turn on when trrying to start.how can i check to see if the problem is the pump?can it be jumped?if so can anyone help me out please.... Easy to test pump. Takes two ...

...sportage 1997 has a lose compression in its engine? You will need this http://www.autozone.com/autozone/accessories/Actron-2-1-2-in-stem-compression-tester/_/N-25j0 Take out each sparkplug, press the ...

I assume this is diesel power sportage. most likely this is caused by low compression. have your engine checked for compression. pressure should be about 30kg/cm2 or 427 lbs/in2 when running at 200rpm

...sportage 2.0 l Yes, unfortunately this engine IS an interferance engine. The only way to tell if anything is bent is to install a new belt and see how it runs or perform a compression test. Let me ...

...SPORTAGE. IT STALLED ON ME. CRANKS BUT ENGINE WON'T TURN OVER. LIGHTS WORK. IGNITION WORKS. WHAT COULD IT BE? Hello mrhbollinger: My name is Roger and I will help you. You did not say Exactly what ...

...sportage? call the engine rebuilders Compression should be between 100 and 140 psi. But all that matters is that they are all similar, within 20% of each other. For example, while 100 or 140 is good, ...

...sportage an i wann know wich is better supercharge or turbo an wich consume the most fule or should i get a cool air intake Both are not good to add on, because both increase the compression, which ...

...compression on a 1998 kia sportage supose to be? drove to store, came out and would not start.towed home.checked fuses and relays-ok. replaced wires and plugs and valve cover gasket (oil in valley ...

...Sportage: The check engine light is on and when we press the gas- the car shakes. There is also a 'loose part' noise that we hear when we apply gas- my friend said it sounded like the heat shield. ...

...sportage lost power while driving. It has fuel and spark. The engine cranks but won't turn over. cylinders show no compression and the only trouble code is for crank position sensor. No compression ...