1996 Nissan 200SX "misfire" Questions

cylender number 1 misfire, Do a complete tune up.. Spark plugs, wires, distributor cap, and rotor button... If it has coil packs that sit on top of the spark plugs.. Replace the spark plugs and ...

my 1996 nissan 200sx se-r misfiring After a crank test to test my catalytic convertor, we put the spark plug wires back on the distributor and now the vehicle misfires when I turn it on, while idleing

i have a knock sensor and a 1 -misfire code. I recently gave my car a tune up and within a month i had a check engine light on. Can you tell me what i should check? Thanks If you could elaborate a bit

misfire after it warms up it seems like something is holding it back after 3000 rpm Your plug wires are getting old. Tune it up and it should take care of that. Don't forget to vote, I'm trying to get

...rubber spark plug wires are deteriorated and reacting to the high humidity on rainy days, causing misfire. Have them checked and replaced if

cylinder 4 misfire, checked distributor, wires and plug. Seems intermittent, no oil in water or water in oil. Any ideas? try switching stuff around move the number 4 plug to number 3, and the 3 to the

1987 Nissan 200SX cranks but hard to start 1987 Nissan 200SX 6V It cranks but hard to start, has good spark, fuel, battery, it puff's smoke and wen it starts doe snot respond shakes, puff's smoke and ...

...emmision are running @11% as it should be alot lower, also the engine is very lumpy almost like a misfire i have check coil packs by moving them around to cylinder to cylinder. the is a real bad ...

...the exhaust pipe is putting and is misfiring There are few possibilities that can cause engine misfire issues. It can be issue with spark plugs or faulty spark plugs. Also get the compression ...

RE: Johnny brown- 2003 Sebring multiple cylinder misfire 3.0 New distributor new crankshaft sensor new plugs new wires good compression injectors good... Installed new EGR started with cold engine and