2005 Chevrolet Cavalier "key sticking ignition half" Questions

key turned on??? If yes the pump and relay is Ok. secondly pull a plug wire and ground a screw driver between the plug wire and the plug leaving an air gap about 1/4 in..... have someone crank it over

...key in ignition lock on a Kia Shuma 2000 Ignition key is broken in half with the half stuck in the ignition lock. Now unable to start car or remove the key. can you use pin-nose pliers to grasp the ...

nut there is a gold metal sticking out half way in the ignition, preventing key from sliding in Somebody tried to steal your car maybe?  Sounds like you need to replace the ignition lock cylinder

...ignition key will only go about half way into the ignition and wont turn the car on check and move steering column jiggle that then put wd40 on key slide it in then jiggle the csteering wheel again ...

...key out of the ignition, we will need another key and don't know if we can get one cut because the key is in two pieces. What do you suggest? A good locksmith should be able to duplicate the key. ...

key in the ignition an hour and a half after I drove the car and tried to turn it. It wouldn't turn. I thought maybe it was a battery problem and it wasn't, then I thought it was a computer problem so

key stuck the ignition! i have 1998 volvo v70xc awd and the key is stuck to the ignition and wont come off my steering wheel does not lok and for the key to come off it must b locked???any suggestions

key in the ignition and turn to the on position. Put the L shaped probe in the hole in the bottom of the ignition, turn the key to the on position. While pushing up on the probe and your key in the on

key in ignition This happen to me 2 times already on my sprinter. The first it cost me $250. To get a lock smith to remove and make a new key. The second time I was not close to any lock smith and the

...key out of the ignition of my Kia Shuma . If you can see it clearly like it is broken off right at the surface, you can take the other half and put a drop of crazy glue on it and stick it back ...