Question about Chevrolet Blazer
...fuse labeled for that circuit? Check the brake bulb socket for short , clean replace bulbs , check connector to rear licence plate lights . Also trailer harness for short , all on same fuse circuit
replacing licence plate light how to replace the licence plate light just twist and spap it from the back side of the plate light Pull back carpet next to truck release. Remove 6 black panel retainer,
Question about Chevrolet Blazer
2003 Pontiac Sunfire- how to replace the licence plate bulb how do you get to the bulb how do i change the low beam bulb for a pontiac sunfire 2003?
How to I change the licence plate bulb remove holder , replace lamp its in the operators guide, lost that?
...fuses if you have h/book ? it will give location and amperage of fuse required also the same goes for the side/tail licence plate lights are on seperate fuses so you do not lose all lights if fuse ...
Question about Chevrolet Blazer
...licence plate lights break the circuit? Day time running lights(DRL) are controlled by the BCM(body control module). There is a sensor in the upper dash that can be bad. Where the defrost vent is, ...
licence plate light on 2005 hyundai accent A slightly better set of instructions might help you. Mine is a 2003 Accent. You have to remove the access panel that covers the lamps and the wiper control.
licence plate light on a Nissan Quest 2005 you have to remove the plastic piece to get to the bulbs and tailgate handle , but it is attached with a pair of bolts. You have to remove the interior lower
...licence plate bulbs) so I'm not sure if the ability to remove them from the outside is accurate or not. Also I take my replacement bulbs from here Aliexpress Homepage almost for free, hh Hope this ...
3,418 questions posted
Usually answered in minutes!
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions
982 Questions