...light replacement is there a way to change dash lights in the radio and dash. I have quite a few out. 2000 silverado 1500 you have to take the radio apart to get to remove the face then you will need ...
...tip soldering gun to replace the LED. It is easy the cover the whole LED with a big gun. Don't add to much heat for to long. You will destroy the LED. They are about 1/16th inch wide x 1/8 inch
out. This requires allot of skill and the right tools, a low temperature soldering pencil a solder suction gun and new bulbs, they are available from Radio Shack the part number is #7219 (12 volt 60ma
...soldering gun, some LED bulbs and a solder extractor (for the old stuff that melts off). Here's a link to a step-by-step bulb replacement with pictures: ...
Question about Chevrolet Silverado 1500
...a soldering gun to do this hope this helps you mine works just fine you can by one but u would have to get it programmed for ur car cause it wouldn't show the mileage u have on yours unless ...
...soldering iron and heat shrink tubing with a heat gun to repair mine - they already outlasted the original sockets lifetime. They do sell some kits that pierce the wire avoiding soldering and heat ...
...light pont bonnieville and part number Hello I have repaired these burnt out display bulbs (3 of them) in GM Delco radio's, it is not a simple repair by any means, the radio must be removed from the ...
Question about Cars & Trucks
...soldering gun. even arough drawing of the windings that's close would work have 8250a stripped out of all burnt up wiring and want to completely rewind it. or at least try ! You know that's a bit ...
...a soldering gun and het joins that are cracked adding a bit of new solder plug back in and check any cracks on these joins will not let your lights operate this is common on the DRL with all ...
6,290 questions posted
Usually answered in minutes!
159 Questions
130 Questions
67 Questions
56 Questions
12 Questions
