...brake lights or turn signals head lights and turns work on the front and i have parking lights all around and all fuses are good It is most likely your brake light switch. The wiring from the brake ...
a brake warning light is coming on and the car a brake warning light is coming on that says "brake P I) and the car won't stop easily hi there, this sounds like your brake pad wear sensor light, it ...
Question about Chevrolet Cavalier
...lights up r First problem is my brake light and ABS light came on. Shortly after my front brakes started to grid so I replaced pads, rotors, calipers, checked e brake, and brake fluid. They still ...
...brake lights don't all work. The center high mount brake light works when the brake is depressed, but both the right and left tail lights do not work. The bulbs are good. Running lights and turning ...
Question about Chevrolet Cavalier
...brake lights while you do this. If they go out when u push the pluger then you will need to adjust the switch. If the switch cannot be adjusted then you will need to replace the switch. If the lights ...
brake light abs light battery light on windows rolling up and down slow and power window barly working brake light- check level of brake fluid. abs light- have car scanned with ABS Brake Scan Tool ...
Question about Chevrolet Cavalier
...brake, hazard or turn signal lights. Ive changed the bulbs, checked fuses, replaces the brake light switch. What else could it be? has no brake, hazard or turn signal lights. Ive changed the bulbs, ...
...lights work but neither brake light works then you need to check the fuses in the fuse panel under the dash on the drivers side.if the fuses are good then it will be either a bad wire at the brake ...
...brake. All the lights are working fine but the brake light on the dash stays on. check the brake fluid level, if its low the light will be on. Usually when the brake pads wear down the fluid will ...
brake lights Check the bulbs everything runs as you said the 3rd brake light works correctly so should they all. Otherwise it may be the socket could be corroded check to ensure this is not your issue
647 questions posted
Usually answered in minutes!
1,849 Questions
1,641 Questions
1,529 Questions
1,438 Questions
1,339 Questions