1995 Nissan Maxima "adjusting clutch" Questions

1987 Maxima-5 speed is difficult to grt in to gear--How to adjust clutch and check clutch hydraulic fluid? TO ADJUST PEDAL HEIGHT ADJUST WITH A STOPPER LIMITING THE UPWARD TRAVEL OF THE PEDAL.PEDAL ...

how to adjust clutch you have points of how to adjust the clutch:1 is the upper push rod at the end of foot pedal and the other is at mini cylinder,lower part, which bolted on bell housing of the ...

clutch have tried adjusting all ways ON A 2000 MAX 6 CYLINDER HAS CLUTCH MASTER CYLINDER AND SLAVE CYLINDER, CHECK FLUID LEVEL AND BLEED CLUTCH SYSTEM AT SLAVE CYLINDER BLEEDER. HAVE NOT HEAR OF CABLE

1989 maxima clutch problem The clutch is not returning to normal position after being pressed when shifting gears. What needs to be done to fix it? Does my clutch need clutch fluid or cable adjustment

...other extreme, if the clutch is not releasing fully, which causes crunching of the gears, either the clutch hydraulic line needs bleeding, or the clutch cable needs adjusting up, whichever type it

My 1999 nissan maxima won't go into gear, even after putting in new clutch fluid. Why will it still not go into gear? there is too much free play on your clutch pedal,this can be adjusted,or there is ...

I have a 5speed manual transmission and it sounds as if the gears are grinding while driving in all gears. The transmission shifts ok, and does not slip, just makes the noise. Can the gears be out of ...

I replace a clutch on a 96nissan and now with the lutch cable all the way adjusted stillhave slop in the pedal Check the pivot shaft bushing on the clutch pedal,

car wont go into gear my 96 maxima 5 speed lost a little pressure in the clutch while driving then i couldnt get it in any gear i had to cut the car off then put it in gear but the car jerks when i do

changing gears I'm having trouble changing gears. Can't get itto go into first and very hard to get it into other gears. you are having problems with ur clutch, need to bleed or adjust, if its easier ...