1993 Chevrolet Corvette "clutch problems" Questions

4 speed manual transmission clutch start problem Safety feature to prevent starting in gear is not working. Battery is new and does not seem to be the problem. When engaging the clutch the starter ...

clutch does not engage with a/c turned on Are you talking about the A/C clutch?No clutch engagement usually means no refrigerant in the system....or not enough to allow the pressure switch in the ...

1998 Corvette - 51K When I let the clutch fully out the engine shuts down. Happens in reverse and first gear (I'm assuming 2-6 as well). this sounds like a clutch problem mostlikely the preasure plate

My 01 corvette has a burnt smell My 01 corvette has a smell when the clutch is engaged while idling. The clutch appears to work properly and shifts ok. Possible problem? the clutch is sliping

clutch sound when engaged It sounds like the thrust bearing.  If the sound is like a shhhhhhhhhhhhhhhhhh noise, and it goes when you depress the clutch, thats your problem.  It's easy to

I have a 1996 Corvette 6 speed manual transmission which requires you to depress the clutch pedal to engage the ignition. Once in the past two weeks (this hasn't happened since), I had symptoms ...

...had to call them to come pick it up bk the transmission was acting up. They checked it out and the clutches are burnt up. They are claiming it is not there fault and expect me to fix the problem.

...THE VET OVER THE WINTER AND THIS SPRING WHEN I WENT AFTER IT I HAD NO AC THE CHARGE IS THERE BUT NO CLUTCH INGAGING Are you fully charged though? If you don't have a full charge the clutch will not ...

...speed it seems to run fine then the problem is most likely the torque converter. The one way sprag clutch in it is probably shot. On the other hand you could have some burned clutches. However if

WHen under load the motor revs up and it seems that the Clutch is slipping, it has 100000miles and I suspecting the clutch or the high / low range might be messed up, its a 4 plus 3 manuel ...