1992 Buick Century "window switch" Questions

...Window Switch Front Remove the front door pull cup screws and pull cup from the front door trim panel. Disconnect the electrical connectors from the front door power window control switch. Remove the ...

...window switch. There should be two dark blue wires at the rear switch. One should have power all the time. That is the power feed from the master switch. If there is no power to the window motor with ...

...window? Or possibly the lock switch not letting the others to work, but they won't work from the driver's master switch either. The lock switch is designed to keep the passenger buttons from being ...

...window switch. 1) "clicking" or "grinding" or "humming" sounds when pressing window switch: More than likely the window regulator and/or window motor has failed. Inner door panel needs to be removed ...

...the window lock feature off, the pink wire should have voltage on it. If it doesn't, check in the door opening for broken wires. Both rear doors are the same- 3 wires to each window switch. Good

...window switch on passenger door- window does work. It will only work when using the window control on the driver door. Did verify the toggle switch works on the driver side. Just today the back ...

...switch when the window was half way up and it continued going up. I had to pull over and pull the master switch assembly from the door panel and unplug it to prevent the window motor from being ...

...window control switch or a broken wire in the door-jamb area.  Please note that EITHER of the switches for the passenger window (the driver's control switch or the one on the passenger ...

...Window switch. Replaced switch, still doesn't control windows. Rear and passenger windows work individually. Drivers window does not work. Motor which runs when u press the switch has loosened ...

WINDOW SWITCH TESTING HOW DO YOU CHECK DRIVERS WINDOW SWITCH well if you checked all fuses and everything involving the window and they are all good then its your switch