2000 Dodge Caravan "removed heater fan motor" Questions

heater fan resistor I am not sure of the location does anyone know? Thank You The Blower Motor Resistor is located on the passenger side firewall, not far from your A/C's H-Valve (or expansion valve),

...heater doesn't work, back one does First: check the Front Blower Motor Relay located in the IPM. Its' location should be on the back side of the cover. There should be an available Spare Relay. ...

...heater blower motor cover. Disconnect the blower motor wiring connector. Remove the blower motor wiring grommet and feed the wiring through the blower motor housing. Remove the blower motor mounting ...

...heater core replacement is not for an amature as the dash assembly has to be removed to gain access to it and this is alot of work even for an esperienced tech.the fan speed sounds like it may be a ...

...heater fan casing it would then work fine. So I'm thinking that the blower needs to be replaced? I know the heater core you have to go through the dashboard & glove compartment but being as I tap the ...

...heater fan quit.Unable to find the propper fuse. The only fuse blowen is the rad fan fuse.A answer would be great because it is -22 outside.Thanks. There are several postings for the same problem on ...

fan resistor located under the dash in the heater box. look under the dash where the glove box is and if you can't see it remove the glove box door to get a better look. Check for power at resistor. I

...heater fan/motor located? Up under dash behind glove box. easier to see if you remove glove box, or at least empty it and move tabs over and let it hang down. Curious, it obviously quit, or is very ...

...HEATER FAN MOTOR REMOVAL . Boy I got all the screws off and I still can't get the shroud to come loose. Shouldn't it not cme stright down ? Motor will not turn on and the aculator does move when you ...

heater relay location A/C only works on high. any other speed, fan quits and lights go out. Any info would be appreciated Likely the fan blower electrical plug has poor contact or the blower motor or ...