2001 Chevrolet Monte Carlo "lock key" Questions

...key hole and also around the lock cylinder edges. It sounds like it's time to buy a new lock cylinder. They can be fairly easy to replace on modern cars, there is a release button you access after ...

THE CAR WILL MAKE THE BUZZING SOUND WHEN THE KEY IS INSERTED IN THE IGNITION BUT WILL NOT TURN,ALSO THE STEARING WHEEL WILL NOT LOCK WHEN THE KEY IS TAKEN OUT the cylinder lock and key needs replacing

...key cyclinder? The 3 wire lead that goes to the lock does not want to releace when pushing in the locking tabs i am worried that i may break something if i pull any harder. I there something the lock ...

...a SMALL amount of WD-40 or Lock De-Icer inside the key hole. Work the key back and forth in the OFF position and see if that helps. DO NOT spray a bunch into the key hole. I love/hate WD-40 . . .

...key into the ignition lock cylinder. Press and hold the DOOR unlock switch. While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF. Release the DOOR unlock ...

try to jump it tomorrow. Wouldn't I still be able to get the key out though? Is the steering column locked? If so try jiggling steering wheel back and forth while trying to remove key. It could be the

keys stuck in ignition tires not locked it is in keys stuck in ignition; tires not locked; it is in park has alarm off, monte carlo ss year 2007 Is the battery dead or disconnected? I've had that ...

...left and right (usually right) while trying to turn the key, the lock in the cylinder is recieving pressure from the the wheel lock, by slightly moving the wheel you are able to turn the key with ...

...key on.watch for the lock light to go off"about 10 mins."then turn the key off.repeat this step1 more time.watch for security light to go off the 2nd. time.if you have 2 keys you need to do this step ...