1997 Buick Park Avenue "replace drive axle 97" Questions

...replace a CV joint on drive side of a 97 Buick Avenue Do youself a favor and replace the whole halfshaft. Disconnect lower control arm from spindle, remove axle nut move strut spindle outward from ...

...Axle Assembly, API Drive Axles SKU: API 1700197008, API 3158-07726494 CV Axle Assembly -- Pass. Side Axle Has Stub Shaft Inserted Into The Splines Of The Inboard Joint; If stub shaft stays on axle ...

...your front wheel drive axles/half shafts, see if the rubber boots that cover the bearings are not torn or missing.. sounds like you might need to replace the axle/half shaft on the passengers ...

drive only locks in on right side. 97 GMC K1500 - When I push the 4x4 button, only the passenger (right) side goes in. Drivers side tries to lock in but only clicks and surges. I replaced the drivers

...like its coming from the front passenger side. I have checked the brakes, and replaced the cv joint axle. Please someone help me out thanks-britt replace wheel bearings or check for feathering of ...

...should i fix it soon as possible or can i still drive it and for how long also at 90,000 miles what should i get done to it thank you for you time ] i appricate it replace axle , is it orig.

...drive shafts on a 97 mazda b2600 4wd to replace the cv boots? every thing stripped down, just at the point of removing the drive shafts, replacing tie rods, idler arm,ball joints & cv boots. When ...

drive shaft turns but the front axle will not lock in. The trans went out a while back. I had it replaced and ever since the front axle has not worked. I took it back to the trans shop and they said (

...drive axle?If so spray some penetrating lube on that area and then drive it. If the noise is gone it is those things rubbing.Otherwise are the front tires cupped on the inner or outer tread? if so ...

...drive axle re installing drive axle on 94 chevy cavalier: 1. after pulling off old drive axle, c ring looks ok, can it be reused or does it have to be replaced before I put new axle back on. 2. ...