2001 Chevrolet Blazer "1993 4 wheel drive" Questions

4 WHEEL DRIVE PUSH BUTTON FOR 1993 4X4 BLAZER....IT HAS HIGH AND LOW DRIVES....HOW DO U PUT IN IT 4 WHEEL DRIVE AND HOW DO U GET IT BACKK INTO 2 WHEEL DRIVE STEP BY STEP PLEASE Your blazer is equipped

4 wheel drive not working I have a 1993 chev blazer. It has the manual shift into 4 wheel drive. When I pull it down to engage the 4X4 into 4 high, it does nothing. However, when I pull it down into 4

1993 Chevrolet S-10 Blazer won't go into 4-wheel drive This Blazer has a push button switch to engage my 4-wheel drive, and it was working just fine. But now it wont engage, and the 4-wheel drive ...

...4 wheel drive dosent work i changed the vacum lines and the diaphram under the battery box but still get nothing the light for four wheel drive comes on one thing i noticed was i get vacum to the ...

...1993 Chevy blazer on 2 wheel drive the sensor is located in tail shaft housing on drivers side on 4 wheel drive it is located in the transfer case in tail housing drivers side both are held in with a ...

1993 s10 blazer 4 wheel drive will on engage when blazer is in reverse position and sounds like its not fully engaged cuase it make grinding noise. it must be in N neutral to engage 4x4

...1993 Chevy S-10 Blazer. 4-Wheel Drive, 4.3L Vortec. When It Gets Warmed Up When I Come To A Stop The Oil Pressure Drops Until I Go Then It Goes Up. Whats The Problem? nothing ..normal low pressure at ...

...1993 S10 Blazer w/ electronic 2/4 WD control - NO battery - with low/no trans fluid. Will the vehicle be in true neutral without battery or will the trans get rotation and risk of seizing? yes being ...

I can't get into 4 wheel drive checked actuator , vacuum lines, makes noise but won't make change in transfer case should be two actuators one on front diff and other on transfer case.

4 wheel drive won't work in low. Works in high. it is probably the four wheel drive hub that is bad.