2007 Chevrolet Cobalt Coupe "switch" Questions

Ad

how do i pull out an ignition switch that is broken on a 1993 mercury sable if you're asking about the switch, it's located under the dash on the PASSENGER side of the steering column, drop lower dash

Ad

Question about Chevrolet Cobalt

1 Answer

2005 ignition switch The key will not go into the off position and the battery dies. What I need to know is how to change the switch? Good day; The following is the removal of the switch 1. remove the

Ad

...lock automatically when you put the car in drive. They unlock when you put the car in park. The switch located in the shiftier can go bad causing the locks to randomly lock and unlock. Also, this ...

What does it mean to clip the wire from the pressure switch and jump it? Molson02536 If you are referring to jumping across the pressure switch on an air conditioning system I recommend you don't do ...

Question about Chevrolet Cobalt

2 Answers

...not turn off while the car is running and just flashes. Is the flasher broken inside the hazard switch, do I have a defective body control module or is it something else? It is as simple as your ...

...the hood latch. If it has wires connected to it, it is possible for it to have an intermittent open switch. If the truck has remote start or is remote start ready, a hood latch with a switch built in ...

2006 Chev Cobalt Brake light switch. Are there supposed to be two wire junctions hooked into it or just the one I can find. I have the Top mount brake lights working but not the L/R brake lights. ...

Question about Chevrolet Cobalt

1 Answer

...but disingages in forward or reverse gears Powssible that there is always power to the inhibitor switch. It is the switch that only allows current to flow thru it when in park or neutral. Could be ...

2008 cobalt accessory wire color for car radio install? Car Radio Accessory Switched 12v+ Wire: Run a primary wire from the back of your radio to the steering column and use the brown wire in the ...

Question about Chevrolet Cobalt

1 Answer

removal of ignition switch remove the lower plastic cover that surrounds the switch unplug the switch remove the screws that hold down the switch you may need to turn the key a little while pulling ...

Not finding what you are looking for?
2007 Chevrolet Cobalt Coupe Logo

777 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...