2007 Nissan Frontier SE Crew Cab "emergency brake cable wont release" Questions

the emergancy brake wont release Most likely the e-brake cable is frozen either the one leading back from the handle/pedal, or the two cables that split and go to each individual wheel.

...emergency brake won't release.i find that when you try to pull the emergency brake, its pretty lose. Your emergency brake is a mechanical brake system that is indipendant of the regular hydrolic ...

...emergency brake go under the car and being that old , the cables are probably rusted..The problem is if you apply the emergency brake it probably wont release.Either get new cables ,or learn to live ...

...may be because the emergency brake cable has stuck and won't release-antilock braking system would not lock the brakes on-they only release the brake when that wheel stops rotating -cheers ...

emergency brake is a mechanical brake system that is indipendant of the regular hydrolic system. If the red brake light on the dash is on make sure it's the emerg. brake and not a problem with the

...Emergency brake. The Emergency brake has a cable and it often is self-adjusting. What has probably happened in your car is that the adjuster has tightened up and the OFF position is too tight for the ...

...properly?, did you bleed the brake lines?, is emergency brake cable completely releaseing the rear brakes or is it hung up somewere?. Check these things first and if all is OK get it to

emergency brake pedal release Foot brake pedal wont release Sometimes lubing the cable around any braces and connections then letting it soak in can loosen a ceased cable. A product such as WD40 has a

brakes wont release a the way carb backfire wont take gas past 4000 rpm try replacing the emergency brake cable

emergency brake light staying on after i changed the rear brakes changed the rear brakes and they work fine but the emergency brake light wont go off it could be the e-brake may not be completely down