Oster Fusion 7-Speed Food Processor/Blender - Black "clean blender blade" Questions

...blender is put on top, the blade will not spin. your blade assembly is corroded. take it off, and using a rag, grab the blades. using another rag, grab the other end (probably rubber) and turn ...

blender has grease build up around blade and underneath where it attaches to base. Do I need a new part or can I fix this myself by tightening something up? Grease can only creep into the blender vase

blender motor out. Smart move. The blade assembly is almost frozen and the motor does not have enough torque.. You need to remove the blade assembly and completely clean out the bearing and reassemble

clean and repack the bearings. On the Vitamix blender models we have here in NZ it is not possible to repack the bearings, you just purchase a new blade assembly complete with bearings and the driving

old bamix - motor on but the blade does not turn. unscrewed the bottom casing and cleaned out the oily part but still not working? If possible, check the spot where the blade fits onto the driveshaft.

...blender jar and the blade assembly are all one unit so you have to purchase a new jar to get the blade assembly.  All of this is dependent on which model of blender you have.    We ...

...to keep the blade assembly clean and working longer is to put water and a drop of dishwashing soap in the blender after use and run the blender at low speed for 15-20 seconds - an old Osterizer

HI I got a proctor silex 7 speed blender 2nd hand and after cleaning it I don't know how to re-assemble it....does the gasket go on first...or the blades first then the gasket??? Gasket, then blades, ...

clean your blender there is a rubber washer in between the blades and where they sit and the glass. Try pushing the blade assembly through the bottom and locate the large washer. Peal it off carefully

...all. Any suggestions? How does the blade attach to the part that mates with the blender that turns the blades? keep trying it will loose unless it had worn out then you will have to replace the