HP Pavilion DV6449US Notebook "button esc working laptops" Questions

...esc button. didn't work this became a problem after trying to down load a device manager program. any soultions please advise. you  have to replace keyboard. coz there is a problem with ...

ESC go to bios, f11 ect any button you try to press does not work, then it will beep with press of any key If it will boot from the windows disc, install the disc and boot from cd. When windows loads,

ESC keys and press the power button, continue to fold FN and ESC keys for 7-10 secs then release - at this point the power light should be blinking and you should still have the black screen of death.

button controller there are small cables 1.5 long check those and there is a lid sensor under the monitor they work in combo all those pieces cost under 10.00 ea. let me know what happens restart your

...esc and del keys. you will see a small green chip on the left side. It is secured to the cover with a single srew. Unplug the wires and replace with a new board ...

...button all lights come on but laptop will not boot up. the laptop dont boot up, i did all you said and plus i disconnect the CMOS for a couple of minutes it boot up once i suth it down a try to boot ...

...button again to start the notebook. Press any key to boot from CD when prompted. The Welcome to Setup screen is displayed. Press the Enter key to continue. A Licensing Agreement screen is displayed. ...

...esc..F10 it takes to the bio page,,but it goes very fast,,it does not seem to be in safe mode..it just keeps prompting me back to the password box..anyone please help on how to reset my system thanks ...

...esc or f10 button to work with Phenix Bios but not sure what to do in this situation teste hard drive in the f10 net bios page it is saying it is ok. Do you have any idea waht this issue is? Any help ...

...button depressed), the computer came up and Windows booted. Could not, at that point, get ESC pressed; wouldn't let me into the BIOS. 6) Restarted and prayed, came up normally; opened the BIOS by ...