Samsung 32 in. LCD Monitor TV "remote dvr button" Questions

...DVR. Remote provided will not work on DVR. The universal remote provided by Comcast works just fine on the TV but will only work on the DVR if you're within 3 feet of it. Someone said ...

...sweep the remote to hit both of them while holding the power button. I have always used the cable/DVR remote to control my devices and left the TV remote in a basket for setup stuff only on the

...remote to operate my vip722 DVR. Sony requires a 5 digit code, and none of the ones in the book work. Any ideas? The Sony RM-YD029 Remote control will work with the Dish Network VIP722 DVR HD ...

DVR Remote. Tried all remote codes listed in Viewsonic and dish web sites ,also talked to support for both cannot get my dish remote code that will work my lcd I connot program the cable remote to use

...DVR remote if it has one or changing the channels on the DVR. Sometimes electronic devices can be temperamental. My satelite box for example is a cheap one from Radio Shack. I often get sound only ...

...remote. manual code method 1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 2. Press and release the desired mode button (TV, DVR, etc.). The red ...

...Please help! Hi. I had the same problem. It may be fixed by pressing the volume down and menu buttons on the tv-set and hold for five seconds. Then you can use the remote to turn DVR demo off. ...

DVR ViP722 remote code. Need it for my TV's remote(the one in the picture)Tried Dish websiteand calling them. Tried sony esupport too. Thanks If you are looking to have the Dish remote operate your TV

...remote sand need to be ablr to put TV on channel 3 for DVR hookup. problem is i had clean antenna and the channel is 3.2. or 3.1 who do i fet to channel 3 manually? how to get channel 3 for DVR hook ...

...DVR remote for Loop Back, Rewind or Fast Forwarding the recorded programs the SOUND of the TV goes OFF (as if the MUTE button has been pressed). The only way of getting the sound back is turning off ...