Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum "proheat sucking" Questions

My bissell proheat 2x dual dirtlifter is not succioning very well then the carpet smells I don't think is succioning well enough because the carpet is wet and smells We have several parts here for the

...proheat turbo carpet cleaner is not sucking up water. How do I get my billell proheat 2x carpet cleaner to **** up water better? It leaves the carpet wet. Hi, Here is a tip that will give you all the ...

Bissell Steam Cleaner I have a 9200-Y Bissell PROheat 2X machinee BUT there is no suction to the water. Is this correct ? If not how do I repair my cleaner is not spraying or sucking up the water?

...proheat I cleaned a thin carpet and it won't pick up the water. We cleaned the unit and let it sit for a few days and tried again. The water will dispense but the machine will not extract the water ...

proheat 6 won't suck dirty water back up, how do I fix this Check that the tank and the nozzle cover are properly installed. If the motor is running, it should be sucking. If it's not, there is a seal

...can I get inst. on line? lost manual can I find on line instructions? hi, Just recently purchased proheat 2x rug cleaner ,miss placed my manual and can't get the water sucked up . Please Help

brush roller not working on Bissell proheat 7920 took off brush to clean and doesnt seem to want to work when in cleaning position. only spins when standing upright my brother changed the roller belt,

...ProHeat, the part that looks like a filter/air vent or something next to the hose on the bottom back of the machine! It was all working fine, then when cleaning and sucking clean water through to ...

Bissell 9500 ProHeat, Why is it leaking water from the dry air vent? The only thing I have seen cause anything like this is a high suds level in the waste water container. Usually caused by using pre ...

cleaning the tubes on the heater of a bissell proheat pet My cleaner will not spray from the base. I have cleaned the heater as many have suggested but I'm not sure how to get the tubes off as i am ...