Bose Cinemate Digital Home Theater System Speaker "sub 3" Questions

...potential between the amp and the sub. If both components have grounded (3-pin) plugs you may have to isolate the ground of the sub by using a 2 to 3 prong adapter and ground the sub to your

...sub NO dont try a 3 amp fuse.It is made to BLOW if there is a problem. That sub is not worth fixing, JUNK it. There are a lot of problems with it. Such as heating up and melting the board witch could ...

3 blown sub plate amp); incorrect connection at the receiver end or the wrong settings You've ruled out most of this because another sub works in its place. So what's left is either sub settings, or a

...sub to maximum (left knob) volume (right knob) about 2/3 clockwise. change the crossover on the yamaha to anywhere from 80-120 ( the 120 will put more bass to the sub) if your yamaha has sub ...

...sub and 3 pair of cubes) and an active sub from a 5 series IV kit. I want to run them all separately through a Denon 2805 for movies and music but I can't work out how to connect the sub. The active ...

...sub doesn't work. Any idea what may have happened. I think the electronics have a 3 years warranty and the drivers have a five years warranty for this product, maybe you can have it replaced. Maybe ...

...3 blown sub plate amp); incorrect connection at the receiver end or the wrong settings As a quick test, unplug the sub cab from the amplifier/receiver end. Switch on the sub and turn the volume down ...

3 ohm sub on a separate speaker line with my 4 ohm speakers on another and play in conjunction on a 250W receiver? sub and main That will depend on the ohms the receiver wants to see, You will need to

...sub. 3. It may work with the right adapters from Radio Shack. It would be a cheap experiment. Since the computer sub was 4 ohms and the Panasonic sub is 8 ohms, you are OK. You can always go up in ...

...3 hours then stopped outputting sound. Tried troubleshooting per manual but no luck. All other speakers appear to be working. I think the subwoofer died but could it be a problem with my reciever? to ...