Jenn-Air JGS8750 Gas Kitchen Range "replacing spark module aire" Questions

Ad

Question about Kitchen Ranges

5 Answers

...spark module compartment and caused a short. The paper wiring diagram under the spark module protective cover was burned from the short. I had a Harper 6542 non-reignition spark module but the ...

Ad

Question about Jenn-Air Kitchen Ranges

1 Answer

Spark module in the back of the stove. Remove the back panel, and there is a blue Spark module. You can find them on-line for about $65. There are only a few wires to un-plug, it only took me about 15

Ad

Question about Kitchen Ranges

1 Answer

...spark module. To check this remove the burner knobs and then clean the ignition switches. Dry them by blowing air and then check. If still not working then you?ll need to get the ignition switch ...

Question about Jenn-Air Kitchen Ranges

2 Answers

...spark intermittently on its own, then the only recourse would be to replace the module. Hope this helps,,,, Bill I have a Jenn Air cooktop that had the same problem. Initially it was an intermittent ...

Question about Jenn-Air Kitchen Ranges

1 Answer

...not stop ticking when it is burning If the ignitor continues to click and spark after the burner is lit you have a faulty "ignition module" and it will need to be replaced. Here is the part to

Question about Jenn-Air Kitchen Ranges

2 Answers

...SPARK MODULE IS BAD.HOPE THIS HELPS.PLEASE RATE MY RESPONSE :) jen air ranges use a sw harness. when you order one you get all 4 in a harness. the problem is the sw just behind the knob . about 40.00 ...

Question about Jenn-Air Kitchen Ranges

1 Answer

ignition "clicks" forever When I turn the knob on, the electric ignition starts "clcking" to start the fire. It never stops until I turn the knob off. Any help? The range is brand new!!! Thanks Nicola

Question about Jenn-Air Kitchen Ranges

1 Answer

the spark module when rotated to the light position. One or more of these switches has failed. on some models these switches are individually replaceable, others, the switch is an assembly of all four

Question about Jenn-Air Kitchen Ranges

1 Answer

...only happening with one burner, the switch on that valve needs to be replaced. If it does it with all the burners it is a problem with the spark module or control.Post back if you have any

Question about Jenn-Air Kitchen Ranges

1 Answer

the spark module when rotated to the light position. One or more of these switches has failed. on some models these switches are individually replaceable, others, the switch is an assembly of all four

Not finding what you are looking for?
Jenn-Air JGS8750 Gas Kitchen Range Logo

104 questions posted

Ask a Question

Usually answered in minutes!

Top Jenn-Air Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3808 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...