the dimensions for the Jenn air c221 cooktop. Hoping this will help. width 29 15/16th of an inch. depth 21 9/16th of an inch. cutout width is 28 7/8th of an inch. cutout depth is 20 15/16th of an inch
by 19-1/4"cutout? No you will not be able to put in that cut out. The reason why is you will have 2 inches on each side or 4 inches on one side
From the stub I have used a 24 inch 5/8 OD flexible gas line with 1/2 inch connectors. The inlet on the cooktop is a 3/8. Any suggestions? Try a bigger inlet pipe sounds like pipe too small for load
micro over it. From the bottom of the upper cabinet to the top of the burner frames you need 33 1/2 inches and from the bottom of the micro to the burner frames you need a minimum of 16 1/2 inches
...crack 10 inches long on electrolux cooktop with 1 inch long "bubble" I did not drop anything on the cooktop mainly caused when customer uses aluminium on the glass top. only solution: new
...inch electric cooktop. Not made by Thermador anymore. I also need one reistat (sp?). Can you help me? Thank you, Good Ol Sandy I have a thermador 45 cooktop with all the parts. Do you want to by the ...
maytag MER6770aaw the 9 inch burner will stay on. this element has the option of being a 6 inch or 9 inch. But the 6 inch only work for few times, and didn't light up at all. if the 9inch dont cycle ...
bunt food the 9 inch burner stays on hi and will not modulate its heat setting ( it comes on and stays on ) . this element has the option of being a 6 inch , or nine inch. the element will shut off ...
...cooktop? if you look in most panels the ground and the neutrals are tied to the same ground. they might be in a different location within the panel but they are common to each other. if you are ...
...had new cooktop installed today, and the knobs set up about an inch off the cook top... shouldn't they be flush with the cooktop? yes , but that could be the manufacturers design or the wrong ...
2 questions posted
Usually answered in minutes!
268 Questions
118 Questions
87 Questions
55 Questions
38 Questions