Brother Multi-Function Center® DCP-8060 Laser Printer "paper tray error" Questions

...paper tray slides in and out. Check the feed (autocompensator) assembly for any damage. If everything is fine, reinstall the tray and power on the printer. Try printing a few print jobs. If the error ...

...paper in tray 3 CAUSE: This error message indicates the paper present sensor flag in one of the trays does not detect paper in the tray. This could be caused by one of the following: A broken sensor ...

...paper tray lift problem. Open all the paper trays and make sure that you have the correct size paper in each paper tray. Also, make sure the paper guides are tight againest the paper in the trays. ...

...paper tray 1 or paper tray 2 or 3 is empty,make sure that you have enough paper in the trays and secondly make sure that you have there is no paper jam in paper roller, even an tiny particle of paper ...

paper tray in which the size error has occurred. ? For Manual Bypass Tray: Place paper in the Manual Bypass Tray. ? For Multiple Bypass Tray: Unload paper from the Multiple Bypass Tray, then reload it

...tray Error 241.1 Paper Jam. I have reseated the tray guides, flipped paper, new paper, etc. When it starts up there is a louding squeaking sound and then it stops and displays the error. Brand New ...

...paper tray button is set to get paper from the bottom paper cassette which is the tray that slides into the bottom of the printer. If you switch the paper tray selection button* to use the rear feed ...

...paper tray correctly and make sure you don't have paper on both sides of the paper trays. I would open all the paper trays & turn the copier off, then back ON. Push in the paper trays one at a ...

...paper tray. You don't say what kind of printer you have and my psychic abilities are nil. The paper tray has sensors that tell the printer what size paper is in the tray. Make sure that the tray ...