Question about Samsung Refrigerators
...pieces. It's like maybe the tray is getting too full and then it all sticks together. I can't figure out where the waxy looking piece goes. It looks like it is shaped like the underside of the ice ...
Question about Bosch Refrigerators
...Ice Maker Tray had a small plastic piece break off. This piece aids the tray in bending to dislodge the ice from the tray. Bosch does not just sell the tray, you will have to buy the whole ice maker ...
Question about Kenmore Refrigerators
...ice maker on-off sensor was blinking, I noticed the rotating arm spikes was stuck on the plastic finger piece it's suppose to go between. I got it loose and put the plastic finger piece back in the ...
...ice bin . Press the door switch in , and press the dispensor actuator pad . In the back , on the panel with the prongs , there is a square box cut-out , which houses a white square plastic piece . If ...
Question about Refrigerators
...pieces and regular cubes. Hey Barb.. does it make "popping" sounds?.. if so..the ice "bucket" shaft has broken the plastic at the drive end.. or either the blades have lost their sharpened edges or ...
Question about Samsung Refrigerators
...pieces that reattach the sensor. There is a foam-rubber piece that the sensor seats into. There is a channel in it for the wire. This assembly is held into place by a plastic bracket. Before getting ...
...pieces of plastic If the pieces of plastic are smaller than the inner diameter of the water tube then you should be looking at the filter washers on the tap and where the water line fits onto the ...
...plastic arms on the ice maker,sometimes they bend and get jammed or when the ice got stuck it did damage to the motor and it finally died,if it's filling,a heater on the ice maker comes on,loosens up ...
...coming in b/c the Ice Maker is still working. Is it possible that the water line for the water dispenser is frozen, but not for the ice maker? What can we do to fix this? Thanks for any help you can ...
Question about Frigidaire Refrigerators
Auger won't fit in at end to make ice cubes come out. It has a comma shaped metal piece and a plastic shaped comma piece and I tried to get this placed "between" to "fit" you need to replace ice maker
108 questions posted
Usually answered in minutes!
1,894 Questions
803 Questions
611 Questions
487 Questions
348 Questions