motor quits after about five minutes of use . I have a VX600C , no bag thanks in advance MIKE heat sensor on the motor its bad thats why it shuts off or your relay module is bad
...down after a short time, restarts but runs only a short time yes that unit has 2 sensors 1 on the motor and 1 on the relay board 1 of them is bad which is making the vacuum shut its like a heat ...
...motor off, and if you wait for a few minutes for it to cool down it will work again. I've done plenty of service calls for these, 100% the problem. I just got off the phone with Terry at Nutone ...
vx550 issues Like most here, ours shuts down after a few minutes use. Ichecked everything and found the thermal protection was shutting it down. I then decided to check online to see if this was a ...
I have a CT600 power brush that would not power up. Thinking the motor was bad in it, I replaced it with a new CT700 power brush, I am still experiencing the same problem the power brush itself does ...
51 questions posted
Usually answered in minutes!
43 Questions
15 Questions