Dayton Gas Furnace Heater "line" Questions

We just replaced the propane gas line. Our stove is gas and it lights, but neither of our gas water heaters will light. Both water heaters are new and have been working for about 4 months before the ...

...ignitor heats up but i see no fuel then it shuts off i have cleaned the fuel screen, replaced fuel lines, cleaned the nozzle(compressed air)and checked pump pressure 3.4 psi changed fuel (kerosene) ...

On Propane supply line, is lever on or off when perpendicular? when parallel? I do not know if I am opening or closing gas line on heater..we do not heat right now, but I would like to be sure propane

how to unplug line gas line for pilot light Hi undo pilot line remove injector blow through this with can of air or air line should remove blockage

when heater works electric line trip off when heater works after few minutes electric line trip off You're drawing more amps than your line is equipped for. Rather than modifying your electric, unplug

...all dust and bugs. Hi ColdinSF, You need to remove the covers from the unit and blow out the gas lines with compressed air. If you can remove the gas lines blow out the lines and what they connect ...

...the oriface. Am try to find out if previous owner may have switched placement of the air and feul lines?? anybody? the fuel line goes to the back of nozzle and the air line goes to the front.the

i replaced the fuel lines and i am not sure the lines are hooked up right - but do not get any fuel out of injector The fuel line goes to the rear connection on the fuel nozzle. The air line from the ...

...PRESSURE-CLEAN FUEL FILTER AND NOZZLE IS CLEAR-SOME ONE HAS BEEN INSIDE THE UNIT BEFORE-DOES FUEL LINE GO NEXT TO BURNER HOUSING OR PUMP LINE-IT NOW HAS FUEL LINE NEXT TO BURNER HOUSING-I'M NOT ...

Empire comfort heaters pilot line from factory 1/8 thick A replacement line is 1/4 thick is that A problem Need to replace pilot line someone wants to sell me A 1/4 inch when factory line is a 1/8 ...