Magnum S9 Base CB Radio "mic cutting" Questions

Radio Shack TRC 47. What are color codes for the 5-pin mic? i have a rs mic for it just trying to wire it up correctly did you cut the wire to the mic plug . 99% of R.S. mics are wired the same. there

i have a radio shack trc-444. im looking for more modulation and power. also woundering bout mic wiring for both a rk56 and an astatic d104m6b power mic. trc-444 has a 4 pin mic plug. thank ya much ...

...mic and cutting in and out with very little volume on the talk back although rec/ and incomeing signals are normal volumn..anyone ? before all this it was having a feed back issue through the ...

...up, recieves fine, breaksup on transmit Galaxy 949 Everything else works, but when you key the mic the radio cuts in and out on transmit. just like if you were pushing the mic button in and out. ...

...When We have a Cobra 148 nw st Sound Tracker When you cut it on it poers on but when you key the mic it want talk. It could be.. Final blown : worst case bad mic : try another one CB/PA switch on ...

looking for the mic gain pot in a midland 100m Looking to turn up the mic gain lets see,do you have another cover? If you do then cut that sucker off nd put the other one on.

...is factory set at 50 to 90% modulation. I would not turn it up all the way unless the radio has a mic power output adjustment on the panel. This way if you go "over mod" you can cut back the power. ...

not enough audio and i dont want a power mic i not enough audioin my 29 ltd and i dont want a power mic i want to cut the limiter Take off the cover, you will need a watt meter or mod meter to do this

...up i hear a ecko coming out of box click sound This usualy says that there may be a break in the Mic. wiring. To find this out sometimes if the break is at one end or the other you can try while ...

When i transmit radio will cut off during transmit, after a few seconds of realeasing mic button radio will come back on. Mic.the in short a be could around? cord Mic the moving witMic the moving you ...