...level doesnt work is there any one local to the midlands where i can send it to get repaired. Sometimes you can repair an item yourself. Using sandpaper or a nail file, remove all of the "gunk" from ...
laser is not rorating after tripod with laser tipped while it was in use )roatting ). Any help? check to see if head spins by hand head gears may be jammed is it fully leveling it will not spin unless
Question about Dewalt Measuring Tools & Sensors
...repair,very impressed. This laser can be repaired. The out of level encoders need to be resoldered as the joints have gone dry. There are parts deliverable for this laser look the link This is a ...
Question about Speed Measuring Tools & Sensors
I have a berger instruments transit level model 200B and have no cross hairs to center it when i look through it , is there a fix?? Yes there is, but I don't think you can do it your self. There are ...
Question about Craftsman Measuring Tools & Sensors
...I was just going to try one more time before I threw it in the garbage. I have a Craftsman lazer level that will not level. Sears refuses to do anything about it. Your turn. Charlne go to the ...
Question about Topcon Measuring Tools & Sensors
...level or just shut off It's likely leveled past it's leveling limit. You can try pulling out the 4 screws holding the bottom out, and very carefully opening the bottom of the laser. The main circuit ...
Question about Cst Measuring Tools & Sensors
the air bubble in level has grown larger than the circle. Is there anything that can be done about this. Products are repaired at the Bosch National Reconditioning Center by factory trained ...
how to fix the plug batery the batery broken inside the laser and now the plug is bag? There are spare parts available to repair this but will have to be sent in for repair.
Question about Starrett Measuring Tools & Sensors
...Level This is a replaceable bubble, but I would like to know the procedure and materials used Contact me at Starrett and I can email you the instructions on how to change the vial only if you want. ...
Question about Robotoolz Measuring Tools & Sensors
...Cable was sold to Bosch, I called Bosch but they do not fix Robotoolz. I dropped my 5 beam laser level a very short distance, even though I followed the recalibration method, it still isn' ...
32 questions posted
Usually answered in minutes!
10 Questions
12 Questions