How does the pump conect to the motor on the inside? Hi, The pump impeller is threaaded onto the pump motor shaft...by spinning the impeller the opposite way that the motor turns you can get the ...
Question about Garden
...fine, runs fine, after 1-2 seconds full pressure, it drops way down to approx hose pressure. loose impeller or broken part inside casing, the pressure relies on the casting being made to have a very ...
Motor runs but no pressure craftsman 2700 easy start some filter is blocked up or the impeller is full or rubbish motor runs so impeller should work no preasure something blocked hoxe kinken start ...
What is a boat impeller? on jet boats jet engine for the water sucks in and pumps out water very high pressure to give forward motion Motovated Design and Analysis Superboat Impeller Animation
water does not come out when I run washer G3050 OH When engine running and water on to inlet the water does not exit the nozzle check the impellers, may need replaced
runs but will not pump water Impeller is bad
Question about Hayward Industrial Products Garden
Why does Unit run momentarily and then stop? I have cleaned the impeller and brush rollers/tracks, but unit runs momentarily and then stops! How do I fix this problem? https://www.hayward-pool.com Ask
...not come up fully, more than supply pressure but not adequate for pressure washing. Probably a bad impeller or waterpump. I have had this problem my self several times... Need to go into the shop or ...
...Have I burned the pump up and if so can it be rebuilt? It is a northstar pressure washer. Yes the impeller is probably shot. If you can find the parts it should be easy
805 questions posted
Usually answered in minutes!
273 Questions
123 Questions
72 Questions
36 Questions
34 Questions