Kodak EASYSHARE 5300 All-In-One InkJet Printer "lid" Questions

kodak 5300 aio change inks printer says colour ink needs changing, but when i lift up lid to replace ink the cartridges are to the far right where you cannot get to them.The instructions on how to ...

Kodak 5100 All-in-One print head does not move when lid is opened. Prints in faded stripes. Open up the Lid. Remove the power cable. Wait ±30 seconds. Reinsert the power and turn the unit on. ...

need to know how to put in a print head dear angie Turn printer on Raise scanner lid (grey KODAK lid) Watch print cartridges automatically center and stop Remove each cartridge (pinch the lower lip to

Lid wont close Just changed cartridges for the first time and now the lid will not close. for jandj232301.... Most likely your print head is clogged, there are 2,00 some nozzle's in it. If the printer

...lights at all You can not update firmware if printer has an error. If that's the only light that's lid up ...Replace ...

assembley cant get scanner lid to close ..... What's stopping it from closing?

...by the photo tray is on - then it is engaged and you cannot print documents. Lift up the clear lid of the little photo tray, pull it back towards you until it clicks in place. The light will go ...

...by doing the following: 1. Remove the paper tray from the printer 2. Remove the top clear plastic lid from the paper tray 3. Insert the paper tray into the printer making sure the silver level is ...

How to I instal the ink and I am having a hard time to close the lid Be sure the cartridge is fully inserted. You will hear it click into place when it is properly seated. Then the door will close.

...Power Opened unit to replace black ink and cartridges did not center so could not replace. Closed lid and now nothing works. Green power cord light is on. What is problem? talked to kodak servcice ...