LG 42PC3D 42 in. Plasma Television "audiovox tv turn" Questions

...TV ON IT SAYS audiovox for 30 sec. then CUTS OUT I TURN ON THE TV AND IT SAYS AUDIOVOX BRIGHTLY FOR A SEC. THEN GOES BLACK AND NOTHING I CAN STILL HERE THE SHOWS BUT THERE IS NO PICTURE. one of two ...

audiovox FPE1907DV Volume problem Volume peaks when TV is turned on When I turn the TV on the volume runs all the way up to 100 and wont allow me to use the remote to lower it. I called the cable ...

...TV TURNS ON BUT NO PICTURE OR SOUND I HAVE A AUDIOVOX FPE3206 MODEL you could have bad capacitors in power supply.You can probably see the they normaly have flat top.If top is round like a bubble it ...

...Audiovox FPE3206 - 32" LCD Flat Panel. The TV Power light comes on (turns blue - the color red indicates OFF) but there is no sound or picture. It went black while I was viewing the TV. This TV is ...

...audiovox lcd tv that will not turn on. The power light blinks blue and then turns back to red. I had a similar problem, except I had sound and with a flashlight I could see audiovox when i turned it ...

audiovox fpe3706/ has sound but no picture. have tried turning off and on, unplugged and restart but still no picture. HI there i am getting a message on my TV ( DPM mode ) ?

...AUDIOVOX FPE3000 30" Flat Panel LCD TV When I turned the TV on this morning there is no picture but there is sound. THe AUDIOVOX logo screen does not appear when the TV is turned on and the manual ...

Audiovox LCD FPE3206 problems Tv was working earlier today. Turned off, came back from town. Turned on, power light turns to blue. But that's it. Can't get the input, menu, anything to come on to ...

...Audiovox FPE 3205 LC32K5. Cure:Replace the three 680uf at 35 volt caps at the top left of the power supply board. Complain to Insignia customer service so they recall the tv.Too many people have the ...

...TV will not turn on all the time, why not The TV will not turn on at all times Make sure the wires are plugged correctly so that the TV is powered. Try to turn it on by pushing the ON button instead ...