...scanner error what i do? First check to see if the scanner is locked. Under the scanner is a slider that locks it. Second see if the scanner lamp is on. If not then a new lamp/invertor is
...scanner: 1. Defective ribbon cable 2. Defective scanner motor 3. Defective scanner lamp or ribbon cable is unplugged - open rear cover to chek this! For 1,2 and 3 - visit Samsung service Good
Question about Samsung SCX Office Equipment & Supplies
...model SCX-4216F. THANKING U IN ANTICIPATION check the cables connected to the scanner pcb mounted at the left side of the machine. may be the flat cable is faulty. or the lamp is not
Question about Samsung SCX Office Equipment & Supplies
...scanner Lamp on Kyocera FS-1118MFP Unit poers up without error, but any scan or copy generates 3200 error and Lamp doesn't light up at any stage. this error belogs to Exposure lamp problem ? cause of ...
Question about Canon Office Equipment & Supplies
...scanner lamp (cis lamp),you must unzip the scanner,is simple you undo 4 screws under the panel above the scanner and then another 4 and so reach the lamp.E225 error means you need to replace the ...
Question about Lanier Office Equipment & Supplies
...if the lamp lights and the scanner moves your ccd could be bad. you may need a service tech. if the lamp does not light it is your problem. lamp, power supply, ballest, or main pcb could be the ...
Question about Ricoh Office Equipment & Supplies
...Scanner Lamp Regulator Malfunction SC199 DF Scanning Finish Error SC120 Scanner Home Position Error 1 SC201: Polygon Motor Error HP Sensor Abnormal-Stays Off SC220 Laser Synchronization Detection ...
...scanner lamp.Unzip the scanner and change the scanner lamp.If a have been useful please give me a vote :).Thanks E225 means you need to replace the scanner lamp.Unzip the scanner and change the ...
lamp defective - camera - scanner board Error code SC-350_01 for Ricoh Aficio 350 - clean the sensor above the drum unit - clean the drum unit SC350 ID sensor pattern test error Your scanner should be
...lamp blown L1 00 Scanner position error L3 00 Scanner position error L4 01 Main motor drive overloaded L6 10 Polygon mirror motor not up to speed H2 00 Fusing unit temperature error H3 00 Overheated ...
371 questions posted
Usually answered in minutes!
1,017 Questions
482 Questions
287 Questions
235 Questions
119 Questions
