Amana ABB1921DE Bottom Freezer Refrigerator "ptc relay" Questions

...PTC relay for compressor I help to connect the replacement PTC relay for the compressor. There are blade terminals numbered 1 to 4 on the front of the relay. What color wires go where? I did not ...

PTC relay for it. Does anyone know where I can find a replacement quickly? Question edited for a lot more clarity. Amazon, Walmart or Danby direct. https://www.google.com/search?q=danby+dkc146sldb+ptc

...PTC start relay. Order part number 6R8MG, it cost less than $20. First, unplug the wine cooler and take off the back panel. The back panel is held into place with several philips head screws. Step ...

...ptc overload relay will tell you how to wire it back as was,on some ptc O/L's there are spaces on the component where you just plug it on piggyback to this ptc,if not then all you do is wire the ...

...on them? no there is reset,but,the ptc overload relay plugged into the compressor is bad,purchase a new replacement ptc overload relay and plug in into the compressor and it will again cool ...

...ptc overload relay replaced on the compressor as this component is getting weak and is cutting out,it uses temperature vs. heat to protect the compressor from a no start or when the compressor cant ...

i haveto get a inividual starter ptc HI, I use ERP 410 (relay capacitor and overload) Get it at your local Appliance Parts Store Very easy to install Leo Ponder imufo2 Please vote for me if this helps

ptc relay looks like and where to find it? the p c relay is located on the side of the compressor . some times covered by a plastic cover . .. very easy to find .. .. in the back down at the bottom ..

...PTC relay WITH terminals by pulling HORIZONTALLY (Usually to the left / 9 O'clock position) NOTE the thermal overload comes off WITH the PTC relay. Remove wire from Thermal overload terminal and ...

ptc relay on the compressor when they go out they make a clicking noise. The compressor will quit and little bit later might try to come back on and click again. You need a new ptc relay. It is on the