Question about Kenmore Microwave Ovens
...start button stopped working. every other button works fine. when i reset the power, it asks me to set clock and when i was setting clock, i presses start button and it worked fine but for using ...
Question about Microwave Ovens
start button does not work on whirlpool microwave: all other buttons work but will not start i am using the "quick start" button to turn it on. I cannot use any other options because the start button ...
Question about Microwave Ovens
...button it does not work holding the stop / clear button for 5 seconds or the start button for 5 seconds usually works, see this link ...
Question about Sanyo Microwave Ovens
...Start button does not work EM-G5596V - Start button does not respond.All other buttons are working fine. MY KIDS WERE USING THE SHARP MICROWAVE R-9H94B FOR A TIMER WITH NO FOOD IN IT. IT NOW DOES NOT ...
...Start Button Not Working First the ''opener'' button started sticking a little bit when pressed, now the start button no longer works. Any advice on where to start? This may not solve your problem, ...
Question about Microwave Ovens
...and start button is not working Sometimes the reason for the start button on your microwave not working ... But first, try holding the off/clear button on the keypad for 5 seconds for a soft
Question about Frigidaire Microwave Ovens
burned out or do we need to replace the whole thing? Power seems to be going to the other buttons, just can't make it actually cook once the selection has been made Does it have a start button
...start button . It started Then made an arking noise. It now makes a Buzzing noise if you turn it on . Have not used after it happened. Thanks Wayne mmv5207ba/bc microwave 0 button fan on button does ...
start working again.I hope the above is clear. If not, please let me know.Regards. Ours did the same after an electric spike 0 and 2 not working. The only way to get it working is replace the key pad.
Question about Whirlpool Microwave Ovens
...working at all. So using the microwave now we have to start press 6 or higher (not programmed buttons) because the lower numbers will not work. You must dismantle the circuit board and check if some ...
334 questions posted
Usually answered in minutes!
122 Questions
129 Questions
91 Questions
99 Questions
58 Questions