Question about Sharp Microwave Ovens
...face plate plug may have come loose.i have seen this on several Sharp microwaves. Simply unplug your microwave, remove two screws holding the face plate, unplug the white plug carefully and then plug ...
the unit and remove the face plate. Pull it back and you will see the wire, it looks like a ribbon, push it in tight, replace the face plate and it should work properly. I see this happen all the time
...plate out the microwave 2nd-face up the down side of the microwave 3rt-remove the three screw or cut metal at 120degree you will see these points. 4- disconect the two cables connected to the motor ...
...plate. You will see the metal tabs which hold it in place. Pull the bulb housing assembly straight out (to your right) as you face the microwave. Then you will locate your halogen 120V 20W bulb. I ...
Question about Sharp Microwave Ovens
...and the top face plate is loose. How can I tighten it? Is this unit 'brand new'?? Call Sharp Electronics @ 800-BE-SHARP. If you received it this way, it may be shipping damage. Contact the
Question about Microwave Ovens
'ears'' poking out thru the front face plate slots, that hook the door on. Epoxy failed after 2 trys to bond, whats the correct fix. Try a Pop-Riveter, drill small hole insert rivet and squeeze handle
...face out. Next look under the unit and there is a brass looking cover with 2 more screws. Mine had writing on it about servicing professionally. Remove that two screws, the two power connections and ...
...plate. Turn the microwave onto its face on a soft rug or blanket. Remove the screws from the back panel of the microwave, and slide the panel upward to take it off the unit. Look for the three fuses ...
Question about Bosch Microwave Ovens
...my Bosch microwave oven did not power up Was it a overload power out. You may have blown a fuse in your unit. Is your microwave on a GFCI and needs to be reset. Are there any codes on the face
...arrangement, The ring would only set one way. The ring did not turn, but rather the wheels faced up and rolled with, and supported the turntable. I'm thinking it's either just a blatant ...
1 questions posted
Usually answered in minutes!
56 Questions
20 Questions
23 Questions
18 Questions
11 Questions