Question about Gateway Televison & Video
...screen will not come on, and I am getting a green light instead of the blue one that should be coming on (probably because the blue and yellow lights are coming on at same time), blinks once, then ...
...i could be working on the computer and it just say no input signal and the screen just go blank EITHER A PROBLEM IN THE UNIT OR A LOSS OF SIGNAL OR LOOSE HOOKUP CONNECTION---CHECK EVERYTHING
...screen view. This is a generic symptom that could happen to any LCD monitor. The following is a generic answer applicable to most. First check to make sure you're not over range. Unplug the monitor ...
...screen. Just long enough for the AV1/S-Video/AV2/3 to go away. and its just black. As long as I see the input in the top right corner I see a perfect picture for that split second. Any ideas? I have ...
...screen to appear once. but after that there will be nothing, the power light will just blink Blue. It doesn't turn amber at all. I'm trying to get it to work as a computer monitor mainly. Am I doing ...
...screen black, no menu or anything. element tech tried to tell me it was a vga problem with computer? remote will not turn on tv. I have the same problem with th I have an element lcdtv 32inch. The tv ...
...blue spot is still there. Can this be corrected Ok...once and for all I will explain the fix (in detail...which has been missing)... 1) Firmware updates do not fix this problem. I had this problem, ...
screen. Block the room light from overwhelming this image (sometimes a carefully positioned flashlight will help you see something). If the inverter or video board is bad, you will see nothing. For an
Question about Sceptre Televison & Video
...screen turned to black while I was using VGA to watch movie from a PC, the Power LED was still Blue. Later, I turned it off and on, Red Sceptre showed for a second then gone, no any picture, and the ...
...computer restart the monitor and leave in a blue screen. May have to try more than once. Start the computer in safe mode. Select change resolution to a lower level and set the Hz at 59. The softer ...
40 questions posted
Usually answered in minutes!
158 Questions
123 Questions
115 Questions
93 Questions
66 Questions