GE WPGT9360EPL Top Load Washer "replace lid switch profile" Questions

...replace the lid switch since it is there for a reason. If you have any other questions or concerns please feel free to comment again. Good Luck!!! Thanks for using Fix-ya. A high rating would be ...

...Prodigy top loader. The washing machine is filled with clothes and water but won't continue the wash cycle. Any suggestions? If you don't hear a click when you close the lid, replace the lid

lid switch will be on the underside just in front of the dispensor. You can test the sensor by using a magnet. Just open the lid and place a magnet just in front of the dispensor on the left side. The

lid switch assembly, you can jump it to test it. If the lid switch and motor is also fine then the control board should be replaced. Hope this helps...please post back for further assistance. Daniel i

It will not spin. Is there a reset switch? try pushing down on lid if it works then you need to replace the lid switch

...when it last spun out the clothers. That was yesterday...today no spin. your lid safety switch under the top cover and lid is bad,you need to remove control panel and front and top covers to ...

...replace a lid switch, you can refer to my profile and look under my "Tips and Tricks" for links for Replacing a Lid Switch. If you still need assistance, please contact me and let me know. I have the ...

...replace a lid switch, you can refer to my profile and look under my "Tips and Tricks" for links for Replacing a Lid Switch. If you still need assistance, please contact me and let me know. PS If the ...

...you need to replace it. Some machines have a special lid-switch fuse near the lid switch, inside the control panel. If this fuse blows, the unit won't fill with water until you replace the ...

...replace a lid switch, you can refer to my profile and look under my "Tips and Tricks" for links for Replacing a Lid Switch. If you still need assistance, please contact me and let me know. PS If the ...