Question about Dell Office Equipment & Supplies
...replace drum light was flashing. I replaced the drum and the light is still flashing. open front door and hold in cancel button until all lights flash up and down like crazy close front cover and u ...
Question about Dell Office Equipment & Supplies
drum light flashing after drum replacement My brother HL2040 lazer printer had the drum light flashing so I replaced it but the orange drum light still keeps flashing. I feel ripped off because I dont
...flashing for a while, but is still printing. Do we need to replace the whole drum? We have just changed our drum unit but the drum light is still flashing. The printer is printing though. Any ...
Question about Office Equipment & Supplies
...flashing "K drum life" across screen. what does this mean? OKI c5100 flashing "K drum life" across screen. what does this mean? "K" drum refers to Black drum Apparently the black drum has reached its ...
flashing you can replace teh drum but the light will continue to flash until you reset it. Do this by opening the front of the printer and holding down the Go button for about 4 seconds until all four
...Drum Error We had toner and error lights flashing in sync, replaced both toner and drum. Lights still flash, and when I press Continue it prints a page saying the printer has stopped because the drum ...
flashing yellow means the drum is near it's end-of-life. There is some life left in the drum at this point. Do the following to get some more mileage out of your current drum and also when you finally
Question about Dell Office Equipment & Supplies
will not print the error light and the drum light flash. Replaced drum but still will not print and error light and the drum lights still flash. The drum counter will have to be reset, Use the ...
...replace the imaging drum, you should reset the imaging drum's counter. To reset the counter, press and hold the Cancel button until all lights flash in sequence. After you replace the imaging drum, ...
Question about Dell Office Equipment & Supplies
...still flashing replace drum After you replace the imaging drum, you should reset the imaging drum's counter. To reset the counter, press and hold the Cancel button until all lights flash in
180 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions