...SM58 is a very rugged and reliable microphone and there are not many things to go wrong with it. Assuming that you have tried using a different cable / amplifier to issolat ethe problem to teh ...
...I'm on a strict budget. Is there a way to purchase a wireless system and exchange the stock mic capsule with my Beta 58 installed? You can use the WA310 cable to plug the Beta 58 into any Shure ...
...sm58 mic and it was dropped. It will work but I have made it fail a couple times. Under which circumstances did it fail? Might be due to internal wiring getting loose or a damaged capsule after you ...
...SM58 The small wires under yellow tape connecting the capsule to the wire harness have broken. What is the best way to replace these? If your talking about the coilwires on the diaphragm, you have to ...
...sm58 beta for the last 3 years and maybe 40 shows and a few weeks ago on our 13th date of a tour it went totally dead....any ideas??? thanks Hi djmalatesta One could go all superstitious and suggest ...
repairing shure wireless mic capsule Contact Shure for Repairs.
how do you take a sm85 microphone apart Unscrew the top portion with your hands to expose the capsule. The connector at the bottom is unscrewed with either a small phillips or slot screwdriver.
...sm58 Wireless Capsule how to open haw i can open the board without damage The Shure wireless mic that has the switches on the side is tricky to open. The first thing is to take the cover off the ...
Question about Shure Audio Players & Recorders
...sm58 capsule is very hard to get apart without damaging the contact surface. You would have to take the contact side apart 1rst bend all the little tabs away which hold the brass plated disk in place ...
SM58 Wireless mic. Working partially, thump it and it will respond, tak or yell and it responds, talk or sing normally, nothing. No loose wires, battery good, Frequency in sync with receiver. Never ...
20 questions posted
Usually answered in minutes!
136 Questions
60 Questions
30 Questions
28 Questions