HP Designjet 110plus nr InkJet Printer "start" Questions

Start-up problems-plotter powers off after a few seconds Z6100 problem on start-up. Seems to begin boot-up sequence. Green led start lamp flashing, empty box on display then after 10-15 seconds the ...

...plotter. Remove all Cards if any from the EIO slots JetDirect card is usually plugged in there. Restart the plotter without the EIO cards installed. If the plotter starts normally. Shut down the ...

The "!" light is flashing; two of the print heads are flashing; I send a drawing to be printed; and nothing happens. The flashing lights signal an error. If the printer started printing, please check ...

Printer Problem I have an HP Designjet 10ps inkjet printer which started to power itself off right after it had finished printing a job. Now it has started to power itself off right in the middle of a

ERROR CODE 04C400 - WHAT TO DO, WHAT IS IT PLOTTER STARTS TO INITIALIZE, MOVING TO LEFT ABOUT 1/2 TO 3/4 WAY IT GIVES ERROR 04C400, PRESS NETER TO CONTINUE. iT THEN SAYS INITIALIZING BUT NEVER CHANGES

...module. (only replace one component at a time) Yeah then you have to guess which part to start with. Maybe anybody else on this forum knows more about the error and has a better idee about ...

Black ink started to print blue/mauve Working fine then black ink started to print a faded blue colour with black printing only towards the bottom of the sheet. Ink levels and printheads ok. Tried ...

...as the machine is powering up You can reset the maintenance count by holding the green go button on start up as soon as you see the memory count start. Keep holding until all three lights are solid ...

...the message displayed "printer spooler service is not running" how to solve the problem? Go to start, then run, then type spoolsv in the box that comes up. ur prinder spooler service is not

not start when we on printer is self start again and not come on running mode Is there an error code in the display?