Sanyo VPC-HD1 HDV Digital Camcorder "manual iris" Questions

iris. Let me know if you want me to send you pdf. Yes I am interested. Please send me a copy to [email protected] Thank you. Nov 10, 2008- I have the exact same problem. can you please send service

...manual iris to control the iris with the iris dial, keeping the video between 4.0 and 6 usually gives you the best exposure (not too hot or too low light.) You also may have a neutral density filter ...

manual ring. While observing the iris blades in the lens, turn on the power again and check the iris blades in the lens work properly. Inspect the iris drive motor of lens drive block (Pin qh to ql of

...iris' above it, what that does is auto pinpoints the light setting for you.. you could also play with the shutter speed and gain located in the back of the camera next to the battery if you have ...

...cucuit fault or many small pana cpsm that go bad all the time in these unit. Mke sure the iris didnt het seitched to manual andif it is i auto try tappin the lens a littlethe see if it opens Good ...

...test the shutter first before assembling the camera completely. To test, open the shutter(curtain) manually by your finger and must close freely once released. Also clean the surroundings for some ...

...I forget to press something ? look on page 33 of the manual. or you can do this in the menu camera set > exposure/Iris > select "iris" make sure the switch on the back is not on auto lock or ...

is sufficient light. It sounds like you may have the the camera in manual mode or that the Iris may be turned down. I am not sure if you model has an Iris control so make sure it is not in manual mode

...manual. After doing this, turn the iris wheel (next to the iris button) all the way down you will see it go from F-(what ever the number is) to OPEN. That will open the iris all the way allowing the ...

...manual. Set the camera to automatic and try again. It sounds to me that the iris is closed, if the head drum is spinning you should get something even if it's random signal noise denoting clogged ...