...not sure how to put it back on. the machine fills up with water but it wont agitate rotate pulleys while trying to reinstall belt. if belt slipped off on its own then belt is streched out. replace ...
...washer. When this belt slips the burning smell happens because the pulleys are spinning and the belt isn't. You will probably need to adjust the tension on the pulleys or get a new belt. This can ...
Washer will not pump water out. It makes a gurgling noise like the belt is slipping or something or grinding. What could be the problem. I think the belt is slipping on the pulley. But someone insight
...wont spin About 90+% of the time when a dryer won't spin it is a broken/slipped belt. If the dryer makes some niose when activated, then the motor is turning, which exonerates the motor, leaving ...
...pulls are turn free water drains but wont spin right. This is joyce sounds like the belt needs to be tighter. sounds like its slipping on pully. that may be why its not spinning correctly. thanks ...
...washer can't spin, when i try to drain the water out it wont do it either. I think it has to do with the belt, where can i find the belton the Kenmore 22942? don't suspect yet for the belt! if the ...
...washer will spin but won't agitate I just installed new belts but the tub wont agitate, it will spin and drain properly. I have a feeling that the other belts were smoked because of this problem. ...
Question about Maytag Washing Machines
...belt slips on the motor pulley and this causes erratic readings from the tacho that is interpreted by the control unit as an fault. A test for this is to run an empty cycle to reduce the load on the ...
Question about Fisher and Paykel Washing Machines
...washer stuck on rinse cycle. Wont advance. Pump fine. Could it be the diverter valve. Took it apart and it was clean, no broken parts. Check your belts, maybe belt slipping or pump jammed, if ...
...washer wa5451an wont drain wont drain Had a similar problem. Turned out the pump impeller got jammed in a broken off zipper pull tab. The pump motor still ran and the belt was slipping. If you decect ...
29 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions