Konica Minolta Minolta 7130 Laser Printer Toner Cartridges "resetting photoconductor counter" Questions

...reset the PC counter, Instructions on how to replace photoconductor unit available at http://bit.ly/aykTXL Instructions on how to reset photoconductor counter available at http://bit.ly/9WAvUK ...

7. Press and hold the red 'Cancel' button with the triangle on it for 3 seconds. All the lights should then cycle. 8. Close the front cover. The Photoconductor Maintenance counter is now reset

...Resetting the photoconductor counter/page counter should only be done whenever you replace the photoconductor unit. Here's an article in the Lexmark website on how to reset the photoconductor page ...

...the supply counter after replacing any individual photoconductor unit. Visit the Lexmark website at http://bit.ly/dk8nHs for the instructions on how to reset the photoconductor page counter.

...Photoconductor Counter. http://support.lexmark.com/cgi-perl/knowledgebase.cgi?ccs=229:1:0:449:0:0&emeaframe=&docid=ENUS21294 Try this link. I replaced the PC Photoconductor on the Lexmark X204n and ...

...photoconductor kit is another word for the drum or imaging drum. All three words refer to the same part. Here is a link from the Dell site for this model. ...

resetting the photoconductor unit Savin 9922DP resetting the photoconductor unit After replacing the PCU, you can clear the counter by going to Clear mode, 107, push and hold Clear/stop. Screen should

...photoconductor counter ? There's no chip on the photoconductor, so you need to reset this manually Photoconductor Reset Procedures: Step 1: Open the front door and hold the Cancel button until all ...

...photoconductor unit. 2. Reset the page count. • Press and hold Select and Return while turning the printer on. • Release the button when Performing Self Test displays. • Select Reset Maint Cnt, and ...

...photoconductor counter on Lexmark E260dn Please click on the link below, this will show you how to reset the photoconductor counter. http://bitly.com/rh8ZSV If you need further assistance please ...