Kodak ESP 7250 All-in-One Printer "1 turning" Questions

...1 and 9 keys (so that the machine will automatically start its remedial program*, turning the control panel solid black). 2) When done (i.e., when the control panel turns white), turn off and then on ...

...you, [email protected] 6000 Broken fuser heater lamp wire The temperature does not reach 100°C/ 212°F after the fuser heater lamp has been turned on continuously for 30 s. 30/31 ppm

1. Turn OFF the Main Power Switch. 2. Turn Main Power Switch ON while pressing the Utility/Counter key. 3. Touch [Trouble Reset]. 4. Check to make sure that [OK] is displayed and the it has been reset

...what does it mean? 6000 simply means Broken fuser heater lamp wire The temperature does not reach 100°C/212°F after the fuser heater lamp has been turned on continuously for 30 s. The ...

...turning Main Power Switch OFF and ON again, or opening and closing the front door in case of a trouble. Setting/ Procedure 1. Turn OFF the Main Power Switch. 2. Turn Main Power Switch ON while ...

...IRC-3200 E000602-0402 trouble code hard drive problem. with the machine turned off hold down the 1 and 9 keys. turn on whilst holding down 1 and 9 and wait. the screen will go black and after a ...

...1. Fuser sub-thermistor open. User problems. Reset required. Turn off power. Hold "0" & "8" keys while turning power on. Then press "8". Then press "9". Then press "print". You will read "3" in ...

With me problem on konica minolta 7235 show error code f35-8 1. Turn OFF the SW2 (sub power). 2. While pressing the copy quantity setting button 2 and 5, turn ON the SW2 (sub power). 3. [Software DIP ...

...hola... el equipo presenta e000602-0003 Problem with hard disc WriteAbort detected for Boot Device. 1. Perform Write Abort Sector detect and repair. <When a monochrome-related Error Code is ...