remove control knob on maytag mde8400ayw timer i need help in how to remove control timer knob youll need to "pop" the center of the dryer knob off, the outer mos part of the knobin which oyou turn is
...control panel, youll see the back of timer( there should be a small black shaft in the middle), with a small screw driver you can hold the very bottom of the shaft and pull it down(it pushes a small ...
...remove the screws from the back of the control panel, removing the back cover. From there you should see the timer. It will either have one wiring harness or many wires attached to the timer. INSURE ...
Question about Kenmore Dryers
control knob, it wouldn't work. We then proceed to remove the top off of the dryer so we could see the underside of the control panel. We assumed maybe some fuses were bad but didn't have time then to
...remove control buttons or handles ,than in the back remove panel you should see more screws once back is removed . Under some of the knobs there is a nut holding the controls to the machine good ...
remove the knob again to see if flat side of shaft has also moved to opposite side. i took a dryer apart yesterday and all checked out OK. lastly i checked control knob and the darn thing was slipping
...the control panel , remove the knob,, under the knob will be 2 screws holding it onto the panel face,, do this all with the machine unplugged,, and be sure and mark all the wires by color
dryer will not turn on I was removing the control panel and did not unplug the unit...first mistake...the clothes selection switch touched the body and sparks...now, the dryer will not turn on when I ...
...WAY TO REPLACE THE STARTER KNOB OR DO I NEED TO REMOVE THE WHOLE TOP PANEL.....HELP!!!! The start switch will need to be replaced. The control panel will need to be removed to replace the
9 questions posted
Usually answered in minutes!
1,743 Questions
867 Questions
815 Questions
489 Questions
196 Questions