Question about NEC Office Equipment & Supplies
status indicator blinking red When I switch on the projector, the status light first blinks green a few times, then a beep beep beep is heard and the status indicator starts blinking red, 5 cycle: the
Question about NEC Office Equipment & Supplies
Status light blinks red bulb replaced only 2 months ago Status light blinks red bulb replaced only two months ago? when i turn the power off and on the status light goes green for about 30 secs then ...
...red status light This project has a flashing red status light and no lamp The projector will turn on and the start up process is normal until the light should turn on. Then status light which started ...
Status indicator blinks RED, not starting. On power-on, the usual start-up delay, the the Status indicator blinks RED, and the Power indicator stays ORANGE; and Projector does not start! There are ...
...red with yellow/orange status light indicates that the temperature is too high, so by the sounds of it your device has malfunctioned, you need to get a repair on this see page 44 here ...
...status lite on red power on orange whats up with it Hello. First check the lamp! From your description, it sounds like the projector is telling you that the lamp needs to be replaced. In "eco mode", ...
Question about Mitsubishi Office Equipment & Supplies
Power and status lights seem to be blinking a code that is not in the manual. status light blinks 4 green to 1 red, while the power light blinks 1 green to 1 red. Lamp cover?
Question about NEC Office Equipment & Supplies
NEC NP-M300W projector: Lamp status RED, replaced lamp still RED. Status indicator GREEN. Won't power on. On the remote control of the projector, press and hold the HELP button for 10 seconds.
Question about Mitsubishi Office Equipment & Supplies
But you might try cleaning the filters first and being sure that nothing is blocking air flow through the projector. Red status solid means replace the lamp, but that doesn't seem to be the indication
...red status lights) mean the lamp needs to be replaced? or could something else be wrong. According to NEC technical support, if the status light flashes red six times, this could indicate a defective ...
9 questions posted
Usually answered in minutes!
75 Questions
41 Questions
39 Questions
27 Questions
39 Questions