Samsung SyncMaster 940MW 19" LCD Monitor "dim display" Questions

Dim display in samsung monitor When the LCD monitor display is dim or flickers and or has a black screen then the fault is usually a faulty inverter or the CCFL lamp. When you look at the screen at a ...

...dim display problem The screen displays is dark/ dim because there is no backlight. There are two parts responsible for lighting the display. First is the CCFL (Cold Cathode Florecent Lamp), which is ...

...Dim display I am attempting to troubleshoot and repair a Samsung SyncMaster 172N for a neighbor.It powers up with the pc, and is very dim to the point of being blacked out. Is there any info someone ...

dim display..so dark that all I see is a faint picture. Are bad capacitors to blame? In regards to the capacitors on the board...mine are somewhat raised and there is a white rubberry substance around

dim display problem Hi there, Have you tried adjusting the LCD's bright and contrast using the buttons on the monitor. Instructions can be found on page 12 of this manual: ...

...DIM DISPLAY I've had a SyncMaster 213T for about 4 years. It worked beautifully until today. Now the top half of the display is dim! Really after only 4 years? At first I thought I could degauss, but ...

...display comes on for a few seconds and then goes dark or dim the backlight inverter may well be defective. The CCFL of the backlight needs several hundred volts to function. change power cable then ...

...DISPLAY IS DIM, OVERLY BRIGHT, OR BLURRY, OR UNPLEASANT.DISPLAY IS OFF CENTER. LEFT OR RIGHT SIDE OF MONITOR IS OBSCURED. - Try adjusting the control knobs located on either the front or back of the ...

...20 mins. But when I move the mouse, the monitors' power light just blinks and nothing happens. It dims also with each blink. After 1 mins or at the most 2 mins,, the display is normal. I have an

The display flickers and dims at times. I also cannot use the remote. Hello, The Samsung SyncMaster 940MW monitor has an issue with the power supply going out. The flashing power light or not turning ...