...worked absolutely fine for about 3 weeks (approx 3000 copies). It has now started missing the top inch of the page off and printing it on the roller or something, then leaving the last inch of the ...
Question about Samsung ML Office Equipment & Supplies
makes a loud banging noise while the paper will only feed in an inch or so A bang for a buck. July 25, 2009 8:06 PM RSS feed for this thread .... These paper noise-makers are pretty loud. And you can ...
Question about Samsung ML Office Equipment & Supplies
Horizontal lines appear every 4 inches on each I have a Samsung ML-1710 printer. Horizontal lines appear every 4 inches on each printed page. This was happening with the old cartidge and continues ...
Question about Samsung ML Office Equipment & Supplies
when i print a page a one inch swath in the document is faded on all pages. The cartrige is new and appears clean If your cartridge is please clean laser unite or replace the fixing roller.
Question about Samsung ML Office Equipment & Supplies
Prints test page with black horizontal fuzzy line every 4 inches or so. Also there are similar gray fuzzt horizontal lines on the back of the printout You should clean the printer's drum and/or ...
Question about Samsung ML Office Equipment & Supplies
The paper does not feed into the printer paper does not feed. It moves about three inches forward in the tray but does not get caught in the rollers to move through the machine Sounds like you have a ...
...left margin. I just replace my cartridge, and now I get a black dot printed every one and one half inches the length of the paper. They are a half inch in from the left edge. Hi, If the black dots ...
...- but the page comes out with the imprint of a kind of track, as if it's being squeezed [about 1 inch from each side] running the length of the paper. You will have to replace your OPC drum. You ...
PAPER JAM ML2010 Paper only travels 3 inches. Screen indicates that there is a paper jam. Paper does not travel far enough to reach rollers. Error lamp goes red. May be it is your toner problem try ...
...refill The fuse is 250mA (250 volt but this is not critical) go and 315mA. The fuse is 3/4" inch long (20 mm) round glass with metal ends. The electrical contacts are not in the cartridge
481 questions posted
Usually answered in minutes!
417 Questions
283 Questions
276 Questions
130 Questions
72 Questions