Toshiba TDP-S8 Multimedia Projector "com power plus" Questions

...power up our Plus Vision U5-232 projector, almost immediately the red status led lights up, there is no image projected from the projector. We have two of these projectors and it happends on both of ...

...POWER button, the system starts normally, the lamp turns on and both the fans begin working. After 10-12 sec. the lamp turns off and the STATUS LED starts blinking in a slow way (the duration of the ...

...com I have a Dell MP2300 with a bad power supply. Everything else, including color wheel is in excellent working condition. the bulb is less than a year old and has less than 500 hours on it. My ...

...com/manualfile.php?rgn=1&cid=007001005 I just had a XJ- S41 projector in for repair because it wouldn't power on. The power light was red solid but the temp and lamp lights were blinking red. ...

...com Bill The main problem is the power supply. In detail, the output capacitor of the power supply causes the problem. I guess, Toshiba or Lite ON didn't consider the aging effect of the output ...

...Power and Lamp light still glow red Is there some kind of bios reset jumper in this projector at all or is the system dead. You can download a pdf of the manual from here: ...

...com. They have the STRTG6153, which is compatible, and may be better. The bad one removed from the circuit measures 15Kohm on pin 3 to pin 5 and the same 15Kohm when the probes are reversed. The good ...

power, and produce VERY LITTLE HEAT! Cheaper to build than the factory ones, at about $175 for a complete bulb with assembly. Have about the same ANSI output as the standard bulbs, I actually think it

POWER , TEMP AND LAMP INDICATOR LIGHTS ARE ALL OFF. THE TWO EXHUAST FANS DOES NOT SPIN. REPLACE BULB DOES THE SAME THING. Mine needed a "fan module" replaced. The part number is 60.J8613.011. Cost was