phaser 7400 squeaks while printing id try lubing the feed rollers well the metal bars where they contact the chassis and lube gears and stepper motors. its been awhile since ive had my phazer. i ...
Black ink is faint OK our Xerox Phaser 6110 is printing perfectly well in colour but when it prints black the ink is faint running in two lines down the left hand side of the paper. It looks like the ...
Question about Office Equipment & Supplies
why showing error code E1, and at the same time, Stepper motor is more rotating? showing error code E1, but Stepper motor is more rotating Check the speed sensor If you wish to get some details; check
Question about SATO Office Equipment & Supplies
I have a SATO M-8400RV printer that stopped printing. When powered on, it make a rapid ticking sound, the display is flickering and the stepper motor does not move although it apears to be receiving ...
speedo problems i am looking to buy a citroen synergie second hand but the dealer says its got a twitchy speedomiter the miles per hour are working though what can it be I had the same problem. The ...
Question about Star Office Equipment & Supplies
starts to print but then the print mechanism gets "stuck" on the right-side. doesn't make any diff if there is a print ribbon in the printer or not. Please give is some more information. For example ...
Question about Xerox Phaser Office Equipment & Supplies
why does my printer smell so bad when I turn it on? Also makes loud clicking sound? Dear Minolata user, Caution : If this product makes loud noise or smells of unusual odor, immediately switch OFF the
kodak I1X09 fault code I1X09 One Line Description: INSERTER SUPPLY 3 stalled when it was moving down Error Type: Soft Shutdown Error Description: If the ELEVATOR STEPPER MOTOR uses more than 130% of ...
cable off flatbed scanner The cable was re-attached, but the stepper motor is not working at all so the scanner is caput!
Question about Canon Office Equipment & Supplies
i have an error code that reads- eoooo51-0000 can u help me fix it this is cause of your horizontal stepper motor gear is crack(near pick up unit),you need to change that part,thanks.
15 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions